Decision support system for choosing the best tourist attractions using simple additive weighting (SAW) method

Main Article Content

Alya Aulia Nurdin

Abstract

Every year, various regions in Indonesia always have many tourists both local and foreign so as to provide benefits for the government and the surrounding local community. However, due to the Covid-19 pandemic, the tourism sector has slumped. Therefore, to revive the tourism sector in the new normal due to Covid-19, there needs to be various considerations. One of them, namely decision support system for choosing tourist attractions with facilities that meet health protocol standards in the new normal/adaptation of new habits. In this study, a case was raised with the aim of choosing the best tourist attractions in Kendal Regency, Central Java with several criteria determined, especially regarding facilities that comply with health protocols. The calculation in this study was done by Simple Additive Weighting (SAW) method. The research was conducted by determining alternatives, criteria, and weight values on each criterion. Then the calculation of the value of preferences and stamps to get the best alternative. From the calculations that have been done, the result of the best tourist attractions in Kendal is Tirto Arum Baru with a preference value of 0.766. However, due to the dynamic nature of the criteria and weight data, it is possible that at any time the selected data may change.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
A. A. Nurdin, “Decision support system for choosing the best tourist attractions using simple additive weighting (SAW) method”, JOSCEX, vol. 2, no. 2, pp. 77-85, Sep. 2021.
Section
Articles

References

D. Barbe and L. Pennington-Gray, “Social Media and Crisis Communication in Tourism And Hospitality,” Handb. E-Tourism, pp. 1–27, 2020.

G. H. N. Aji And R. Saputra, “Aplikasi Pendukung Pemilihan Objek Wisata Kabupaten Kebumen Menggunakan Metode Analytical Hierarchy Process (AHP) Dan Simple Additive Weighting (SAW),” J. Masy. Inform., vol. 10, pp. 28-39, 2019.

A. Hermawan And Evan, “The Hotel Recommendation System Using Saw (Simple Additive Weighting) And Topsis (The Technique For Order Of Preference By Similarity To Ideal Solution) Method,” Bit-Tech, vol. 1, No. 3, pp. 131–145, 2019.

D. Aditia, D. Nasution, “Dampak Pandemi Covid-19 Terhadap Perekonomian Indonesia.”, J. Benefita, vol. 5, no. 2, pp. 212–224, 2020.

A. Maharani and F. Mahalika, “New Normal Tourism Sebagai Pendukung Ketahanan Ekonomi Nasional Pada Masa Pandemi (New Normal Tourism as a Support of National Economic Resistance in the Pandemic Period),” J. Kaji. LEMHANNAS RI, vol. 8, pp. 14, 2020.

N. Zukhri and E. Rosalina, “Acceleration model for tourism industry recovery based on environment post COVID-19,” IOP Conf. Ser. Earth Environ. Sci., vol. 599, p. 012090, 2020.

W. Hanggoro, S. Subiyanto, and A. Suprayogi, “Peta Sebaran Wisata Kabupaten Kendal Berbasis Sistem Informasi Geografis (Studi Kasus Kabupaten Kendal),” J. Geod. Undip, vol. 6, no. 4, pp. 35–40, 2017.

P. Brouder et al., “Reflections and discussions: tourism matters in the new normal post COVID-19,” Tour. Geogr., vol. 22, no. 3, pp. 735–746, 2020.

R. & Baggio and L. Caporarello, “Decision Support Systems in a Tourism Destination: Literature Survey and Model Building,” Conf. Ital. chapter AIS (Assoc. Inf. Syst.), no. May 2014, 2005.

S. Abubakar, “Pemilihan Objek Wisata Kota Labuan Bajo Menggunakan Metode Simple Additive Weighting (SAW),” Jati (Jurnal Mhs. Tek. Inform.), vol. 2, no. 2, pp. 270–274, 2018.

T. Masron, N. Ismail And Azizan Marzuki, “The Conceptual Design And Application Of Web-Based Tourism Decision Support Systems,” Theor. Empir. Res. Urban Manag., vol. 11, no. 2, pp. 64–75, 2018.

L. O. Muhlis, S.E.A. Kurni, and A. Kurni, “Sistem Penunjang Keputusan Untuk Penentuan Prioritas Pengembangan Destinasi Wisata Kabupaten Manokwari Menggunakan Metode Simple Additive Weighting (SAW),” J. Ilm. Sist. Inf. dan Tek. Inform,.vol. 3, pp. 27–37, 2020.

N. A. Hadiwijaya, H. Hamdani, A. Syafrianto, and Z. Tanjung, “The Decision Model For Selection Of Tourism Site Using Analytic Network Process Method,” Int. J. Intell. Syst. Appl., vol. 10, no. 9, pp. 23–31, 2018.

N. K. Sukerti, “Sistem Pendukung Keputusan Menggunakan Simple Additive Weighting Metode (SAW) Dalam Merekomendasikan Objek Wisata Di Pulau Nusa Penida,”, Semin. Nas. R. (SENAR) 2018, vol. 1, no. 1, pp. 93–98, 2018.

N. K. A. P. Sari, “Implementation of The AHP-SAW Method In The Decision Support System for Selecting The Best Tourism Village,” J. Tek. Inform. C.I.T Med., vol. 13, no. 1, pp. 23–32, 2021.

G. S. Mahendra and K. Y. Ernanda Aryanto, “SPK Penentuan Lokasi ATM Menggunakan Metode AHP dan SAW,” J. Nas. Teknol. dan Sist. Inf., vol. 5, no. 1, pp. 49–56, 2019.

P. A. W. Santiary, P. I. Ciptayani, N. G. A. P. H. Saptarini, and I. K. Swardika, “Sistem Pendukung Keputusan Penentuan Lokasi Wisata Dengan Metode Topsis,” J. Teknol. inf. dan ilmu komp., vol. 5, No. 5, pp. 621–628, 2018.